Ilia Belov

Senior Lecturer Materials and Manufacturing , specialization Computational Techniques
Associate Professor
Department of Materials and Manufacturing , School of Engineering
PhD with major in Physics and Mathematics
Presentation Publications

Research

Materials and manufacturing processes is a research area to study relationships between process, structure development, and resulting characteristics of a manufactured component. It includes characteristics of material combinations to determine component quality, and lifetime in the operating environment. Mathematical modeling, computational techniques and optimization methods for product design and manufacturing of e.g. metal cast components and surface coatings are of interest. The research covers finite element simulation of electro-deposition of metals and application of computational fluid dynamics to heat transfer problems. Experimental validation methods are important for development of high-quality computational models.

Biography

Ilia Belov has a master degree in Applied Mathematics from the Mordovian State University (Saransk, 1997), and a PhD in Mathematical Modeling and Numerical Methods from Institute for Mathematical Modeling, RAS (Moscow, 2000). He holds a title of associate professor (docent) in Materials and Manufacturing, with specialization on Computational Techniques, since 2013.

He joined the School of Engineering, Jönköping University in 2000. In 2001 he is a researcher in Centre for Robust Electronics in Jönköping, a cooperation between university, institute and industry. Currently he is employed as a senior lecturer at the Department of Mechanical Engineering – Materials and Manufacturing technology. Academic activities include supervision of industrial PhD students, course development, teaching, examination and thesis supervision at bachelor, master and PhD levels. Educational areas cover surface technology, physics and simulation, mathematics, robust electronics, including thermal management and reliability prediction methods.

Article

Belov, I., Fourlakidis, V., Domeij, B., Matsushita, T., Diószegi, A. (2024). A thermal conductivity model for lamellar and compacted graphite irons International Journal of metalcasting. More information
Matsushita, T., Domeij, B., Fourlakidis, V., Belov, I., Diószegi, A. (2024). A model for the effect of microstructure on the ultimate tensile strength of cast irons International Journal of metalcasting. More information
Ahmadkhaniha, D., Zanella, C., Belov, I., Matsushita, T. (2024). Study of the process parameters influence on crack formation in laser alloying of grey cast iron Optics and Laser Technology, 179. More information
Sundaram, D., Matsushita, T., Belov, I., Diószegi, A. (2024). Evaluation of permeability models for foundry molds and cores in sand casting processes Archives of Foundry Engineering, 24(1), 94-106. More information
Matsushita, T., Sundaram, D., Belov, I., Diószegi, A. (2024). Kinetic model for the decomposition rate of the binder in a foundry sand application Archives of Foundry Engineering. More information
Belov, I., Fourlakidis, V., Domeij, B., Matsushita, T., Diószegi, A. (2024). A thermal conductivity model for grey iron International Journal of metalcasting, 18(3), 2107-2117. More information
Matsushita, T., Belov, I., Svidró, J., Svidró, J., Diószegi, A. (2024). Analysis of the penetration behavior of molten cast iron into the sand mold International Journal of metalcasting, 18, 2254-2267. More information
Belov, I., Matsushita, T., Johansson, A., Jarfors, A. (2023). Simulation and Experimental Methodology for Virtual Prototyping of Annealed Industrial Coils Heat Transfer Engineering, 44(4), 353-367. More information
Domeij, B., Belov, I., Fourlakidis, V., Diószegi, A. (2023). Implementation and Validation of Casting Simulation Methodology for Diagnostics of Lamellar Graphite Iron International Journal of metalcasting, 17, 1507-1517. More information
Domeij, B., Belov, I., Fourlakidis, V., Diószegi, A. (2023). Metodik för kort väg mellan forskning och gjutsimuleringsverktyg Gjuteriet, 12-13. More information
Matsushita, T., Belov, I., Johansson, A., Jarfors, A. (2022). Influence of contact pressure on the thermal contact conductance of layered metallic sheets High Temperatures-High Pressures, 51(1), 63-82. More information
Fourlakidis, V., Belov, I., Diószeg, A. (2022). Experimental model of the pearlite interlamellar spacing in lamellar graphite iron Tecnologia em Metalurgia, Materiais e Mineração, 19. More information
Matsushita, T., Belov, I., Siafakas, D., Jarfors, A., Watanabe, M. (2021). Interfacial phenomena between molten iron and molten slag–Effect of nitrogen on the Marangoni convection Journal of Materials Science, 56, 7811-7822. More information
Zamani, M., Belov, I., Sjölander, E., Bjurenstedt, A., Ghassemali, E., Seifeddine, S. (2020). Study on dissolution of Al2Cu in al-4.3cu and a205 cast alloys Metals, 10(7), 1-17. More information
Zhang, Y., Nee, H., Hammam, T., Belov, I., Ranstad, P., Bakowski, M. (2019). Multiphysics Characterization of a Novel SiC Power Module IEEE Transactions on Components, Packaging, and Manufacturing Technology, 9(3), 489-501. More information
Aladov, V., Belov, I., Valyukhov, V., Zakgeim, A., Chernyakov, A. (2018). A study of thermal regime in the high-power LED arrays St. Petersburg Polytechnical University Journal: Physics and Mathematics, 11(3), 39-51. More information
Belov, V., Leisner, P., Mannikoff, A., Belov, I. (2018). Mathematical Model of Multi-Phase Power Converter for Parallel Computation International Journal of Emerging Electric Power Systems, 19(1). More information
Fourlakidis, V., Belov, I., Diószegi, A. (2018). Strength prediction for pearlitic lamellar graphite iron: Model validation Metals, 8(9). More information
Leisner, P., Zanella, C., Belov, I., Edström, C., Sandulache, G., Hansal, W. (2017). Control of silver throwing power by pulse reverse electroplating Transactions of the Institute of Metal Finishing, 95(1), 25-30. More information
Zhang, Y., Hammam, T., Belov, I., Sjögren, T., Bakowski, M., Nee, H. (2017). Thermomechanical Analysis and Characterization of a Press-Pack Structure for SiC Power Module Packaging Applications IEEE Transactions on Components, Packaging, and Manufacturing Technology, 7(7), 1089-1100. More information
Belov, I., Zanella, C., Edström, C., Leisner, P. (2016). Finite element modeling of silver electrodeposition for evaluation of thickness distribution on complex geometries Materials & design, 90, 693-703. More information
Belov, I., Jarfors, A. (2016). Simulering av prestandan hos rheogjutna kylflänsar , 49-. More information
Payandeh, M., Belov, I., Jarfors, A., Wessén, M. (2016). Effect of Material Inhomogeneity on Thermal Performance of a Rheocast Aluminum Heatsink for Electronics Cooling Journal of materials engineering and performance (Print), 25(6), 2116-2127. More information
Belov, I. (2015). Simulering av ytbeläggning på gjutna komponenter Gjuteriet, 49-. More information
Zsolt, T., Zhang, Y., Belov, I., Nee, H., Bakowski, M. (2015). Investigation of Pressure Dependent Thermal Contact Resistance between Silver Metallized SiC Chip and DBC Substrate Materials Science Forum, 821-823, 452-455. More information
Johansson, J., Belov, I., Johnson, E., Dudek, R., Leisner, P. (2014). Investigation on thermal fatigue of SnAgCu, Sn100C, and SnPbAg solder joints in varying temperature environments Microelectronics and reliability, 54(11), 2523-2535. More information
Johansson, J., Belov, I., Johnson, E., Leisner, P. (2014). A computational method for evaluating the damage in a solder joint of an electronic package subjected to thermal loads Engineering computations, 31(3), 467-489. More information
Leisner, P., Zanella, C., Belov, I., Edström, C., Wang, H. (2014). Influence of anodic pulses and periodic current reversion on electrodeposits Transactions of the Institute of Metal Finishing, 92(6), 336-341. More information
Chedid, M., Belov, I., Leisner, P. (2010). Modelling and Characterization of Electrostatic Current Noise Induced Mechanically in Wired Wearable Applications Journal of Electrostatics, 68(1), 21-26. More information
Leisner, P., Belov, I. (2009). Influence of process parameters on crack formation in direct current and pulse reversal plated hard chromium Transactions of the Institute of Metal Finishing, 87(2), 90-96. More information
Belov, I., Lindgren, M., Johansson, A., Danielsson, T., Sarius, N., Leisner, P. (2009). Thermal Analysis of a Power Electronics Module in the Prototyping Phase Electronic Environment, 6-9. More information
Belov, V., Leisner, P., Johansson, A., Paldyaev, N., Shamaev, A., Belov, I. (2009). Mathematical modelling of a wind power system with an integrated active filter Electric power systems research, 79(1), 117-125. More information
Chedid, M., Belov, I., Leisner, P. (2007). Experimental Analysis and Modelling of Textile Transmission Line for Wearable Applications International Journal of Clothing Science and Technology, 19(1), 59-71. More information
Leisner, P., Möller, P., Fredenberg, M., Belov, I. (2007). Recent progress in pulse reversal plating of copper for electronics applications Transactions of the Institute of Metal Finishing, 85(1), 40-45. More information
Belov, I., Lindgren, M., Leisner, P., Bergner, F., Bornoff, R. (2007). CFD aided reflow oven profiling for PCB preheating in a soldering process: Part 1(2) Electronic Environment, 25-28 Göteborg: Just media . More information
Lindgren, M., Belov, I., Törnvall, M., Leisner, P. (2007). Application of simulation-based decision making in product development of an RF module Microelectronics and reliability, 47(2-3), 302-309. More information
Belov, I., Lindgren, M., Leisner, P., Bergner, F., Bornoff, R. (2007). CFD aided reflow oven profiling for PCB preheating in a soldering process: Part 2(2) Electronic Environment, 25-27 Göteborg: Just media . More information
Belov, I., Wingbrant, H., Spetz, A., Sundgren, H., Thuner, B., Svenningstorp, H., Leisner, P. (2006). CFD analysis of packaging and mounting solutions for SiC-based gas sensors in automotive applications Sensor Letters, 4(1), 29-37. More information
Chedid, M., Belov, I., Leisner, P. (2006). Electromagnetic Coupling to a Wearable Application Based on Coaxial Cable Architecture Progress in Electromagnetics Research Symposium (PIERS), 56, 109-128. More information
Belov, V., Shamaev, A., Leisner, P., Johansson, A., Magnhagen, B., Belov, I. (2006). A simulation-based spectral technique for power quality and EMC design of an independent power system International Journal of Emerging Electric Power Systems: IJEEPS, 7(1), 1-22. More information
Lindgren, M., Belov, I., Leisner, P. (2005). Experimental Evaluation of Glob-top Materials for use in Harsh Environments Journal of Microelectronics and Electronic Packaging, 2(4), 253-268. More information
Belov, V., Paldyaev, N., Shamaev, A., Johansson, A., Leisner, P., Belov, I. (2005). A complete mathematical model of an independent multi-phase power supply system based on multi-phase bridge-element concept WSEAS Transactions on Circuits and Systems, 4(9), 1009-1018. More information
Leisner, P., Belov, V., Belov, I. (2004). Computer Aided Design for EMC and Power Quality Science Park Jönköping, nov, 21. More information
Lindgren, M., Belov, I., Leisner, P. (2004). Thermal and thermo-mechanical analysis for design evaluation of an automotive radar module Quality and Reliability Engineering International, 20(7), 709-726. More information
Carlsson, J., Belov, I. (2002). Influence of a Slot on the Induced Current in a Wire Inside a Conducting Box with a Square Aperture Microwave and optical technology letters (Print), 32(1), 25-29. More information
Belov, I., Bespalov, M., Klochkova, L., Kuleshov, A., Suzan, D., Tishkin, V. (2000). Транспортная модель распространения газообразных примесей в атмосфере города = Transport model of gas impurities spread processes in urban area Математическое моделирование: (Mathematical Modelling), 12(11), 38-46. More information
Belov, I., Tishkin, V. (2000). О повышении точности решения задачи численного моделирования электромагнитных полей в идеально согласованной среде (in Russian): (A technique for improving accuracy of numericasl modelling electromagnetic fields in perfectly matched layers) Математическое моделирование: (Mathematical Modelelling), 12(3). More information
Belov, I., Bespalov, M., Klochkova, L., Pavlova, N., Suzan, D., Tishkin, V. (1999). Сравнение моделей распространения загрязнений в атмосфере = Comparative Analysis of models of pollutions spreading in atmosphere Математическое моделирование: (Mathematical Modelling), 11(8), 52-64. More information
Belov, I., Tishkin, V. (1999). Высокочастотные электромагнитные поля внутри помещений: (High-frequency electromagnetic fields inside premises) Математическое моделирование: (Mathematical Modelling), 11(11), 24-38. More information
Belov, V., Tishkin, V., Belov, I. (1998). Математическое моделирование в решении проблемы электромагнитной совместимости и безопасности систем (in Russsian): (Mathematical modelling in solving the problem of electromagnetic compatibility and safety of systems) Новое в ЭМС: (New in EMC), 30 – 37-. More information
Belov, V., Shamaev, A., Leisner, P., Mannikoff, A., Belov, I. . Mathematical Model of Electric Power Conversion System - Experimental Validation and Evaluation of Parallel Computing Electric power components and systems. More information

Book chapter

Belov, V., Leisner, P., Paldyaev, N., Shamaev, A., Belov, I. (2010). Methods and Models for Computer Aided Design of Wind Power Systems for EMC and Power Quality. In: S. M. Muyeen (Ed.), Wind PowerMore information

Conference paper

Belov, I., Matsushita, T., Fourlakidis, V., Sundaram, D., Diószegi, A. (2023). A simulation and experimental methodology to evaluate conditions for gas penetration from FURAN sand core into a cast iron melt. 17th European Congress and Exhibition on Advance Materials and Processes, FEMS EUROMAT 2023, 03-07 September 2023, Germany. More information
Chernyakov, A., Aladov, A., Belov, I., Belov, V., Zakgeim, A. (2019). Modeling of Temperature Distribution Induced by Thermo-Mechanical Deformation of High-Power AlInGaN LED Arrays. 25th International Workshop on Thermal Investigations of ICs and Systems, THERMINIC 2019, Lecco; Italy; 25 - 27 September 2019. More information
Belov, I., Alavizadeh, Z., Lindgren, M., Ryden, J., Leisner, P. (2018). Experimental and CFD evaluation of active anti-condensation methods for non-hermetic cabinets. 19th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2018, 15 April 2018 through 18 April 2018. More information
Belov, I., Nordh, A., Salomonsson, K., Leisner, P. (2017). Fin‐Tube and Plate Heat Exchangers: Evaluation of Transient Performance. 18th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2017; Dresden; Germany; 3 April 2017 through 5 April 2017. More information
Lang, J. Belov, I. Hellén, J. Lim, J. Schodt, B. Nilsson, T. , ... Leisner P. (2017). Thermo-mechanical reliability and performance degradation of a lead-free RF power amplifier with GaN-on-SiC HEMTs. 11th European Conference on Silicon Carbide and Related Materials, ECSCRM 2016; Halkidiki; Greece; 25 September 2016 through 29 September 2016. More information
Chernyakov, A., Aladov, A., Belov, I., Zakgeim, A. (2017). Thermal resistance and temperature distribution in blue and white high-power LED arrays. 23rd International Workshop on Thermal Investigations of ICs and Systems, 27-29 September 2017, Amsterdam, the Netherlands. More information
Leisner, P., Zanella, C., Belov, I., Edström, C., Sandulache, G., Hansal, W. (2016). Influence of pulse reverse plating parameters on throwing power in a silver cyanide bath. 7th European Pulse Plating Seminar, Vienna, March 3-4, 2016.. More information
Belov, I., Arwidson, J., Poder, R., Johannesson, P., Leisner, P. (2016). Thermal fatigue life prediction: consequences of cycle reduction and material property variation. Electronic Environment Conference, Apr. 19-21, 2016, Kistamässan, Kista, Sweden. More information
Lang, J. Lim, J. Hellén, J. Nilsson, T. Schodt, B. Poder, R. , ... Leisner P. (2016). Reliability study of a RF power amplifier with GaN-on-SiC HEMTs. Pennington, N.J.: Electrochemical Society, Symposium on Gallium Nitride and Silicon Carbide Power Technologies 6 - PRiME 2016/230th ECS Meeting, 2 October 2016 through 7 October 2016. More information
Belov, I. (2016). Reliability study of GaN HEMTs. International SiC Power Electronics Applications Workshop, ISiCPEAW, Stockholm, 18-19 May, 2016.. More information
Lang, J. Belov, I. Hellén, J. Lim, J. Schodt, B. Nilsson, T. , ... Leisner P. (2016). Thermo-mechanical Reliability and Performance Degradation of a Lead-free RF Power Amplifier with GaN-on-SiC HEMTs. The 11th European Conference on Silicon Carbide and Related Materials (ECSCRM), Haldiki, 25-29 September, 2016.. More information
Belov, I., Payandeh, M., Leisner, P., Jarfors, A., Wessen, M. (2016). Effect of fillets on heat transfer in a rheocast aluminium heatsink. 17th International Conference IEEE EuroSimE, Montpellier, April 17-20, 2016.. More information
Belov, I., Arwidson, J., Poder, R., Johannesson, P., Leisner, P. (2015). The effect of variations in temperature cycling profile and mechanical properties of solder on thermo-mechanical reliability of a lead-free BGA package. Piscataway: IEEE Press, 16th International Conference IEEE EuroSimE 2015, Budapest, April 19-22, 2015.. More information
Bakowski, M., Nee, H., Zetterling, C., Belov, I., Leisner, P. (2015). High temperature electronic systems all in silicon carbide for hybrid and electrical vehicles. International SiC Power Electronics Applications Workshop, ISiCPEAW 2015, Stockholm, May 26-28, 2015.. More information
Belov, I., Zanella, C., Edström, C., Leisner, P. (2015). Simulation based investigation of silver plating process parameters and their effect on throwing power. International Conference EAST Forum 2015. More information
Belov, V., Butkina, A., Bolschikov, F., Leisner, P., Belov, I. (2014). Power quality and EMC solutions in micro grids with energy-trading capability. Piscataway, N.J.: IEEE Press, International conference EMC Europe, 1-4/9, 2014, Gothenburg, Sweden. More information
Leisner, P., Edström, C., Hansen, Å., Belov, I., Poder, R. (2014). Controlling throwing power of functional silver by pulse plating: Invited paper. 6th European Pulse Plating Seminar, Vienna 7 Mar, 2014. More information
Toth-Pal, Z., Zhang, Y., Belov, I., Nee, H., Bakowski, M. (2014). Investigation of Pressure Dependent Thermal Contact Resistance between Silver Metallized SiC chip and DBC substrate. European conference ECSCRM 2014, Grenoble, France, 21-25 Sep. 2014. More information
Zhang, Y., Belov, I., Bakowski, M., Nee, H., Leisner, P. (2014). Investigation of a finned baseplate material and thickness variation on thermal performance of a SiC power module: Key-note presentation. 15th Int. Conference IEEE EuroSimE 2014; April 7-9 2014, Ghent, Belgium. More information
Zhang, Y., Belov, I., Bakowski, M., Sarius, N., Nee, H., Leisner, P. (2013). Thermal evaluation of a liquid/air cooled integrated power inverter for hybrid vehicle applications. 14th international conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Micro-Systems, 2013, April 15-17 2013, Wrocław, Poland. More information
Johansson, J., Belov, I., Johnson, E., Leisner, P. (2012). An approach to life consumption monitoring of solder joints in operating temperature environment. 13th International Conference of Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2012. More information
Belov, I., Alavizadeh, Z., Lindgren, M. (2011). Application of engineering optimization to evaluate heating-based humidity management in electronics enclosures. 13th International Conference of Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2012. More information
Belov, I., Lindgren, M., Ryden, J., Alavizadeh, Z., Leisner, P. (2010). CFD Assisted Design Evaluation and Experimental Verification of a Logic-Controlled Local PCB Heater for Humidity Management in Electronics Enclosure. EuroSimE 2010. More information
Chedid, M., Belov, I., Leisner, P. (2010). Low Power High bandwidth Power-Line Communication Network for Wearable Applications. EuroSimE 2010. More information
Belov, I. (2009). Evaluation of Anti-Moisture Measures in Electronics Enclosure: Application of CFD Modelling. Electronic Environment 2009 på Stockholmsmässan, Älvsjö 31/3-1/4, 2009. More information
Lindgren, M., Belov, I., Johansson, A., Danielsson, T., Gunnarsson, N., Leisner, P. (2009). Multi-disciplinary Approach to Design of a Power Electronics Module for Harsh Environments. IEEE EuroSime 2009, Delft, The Netherlands, 27-29/4, 2009. More information
Belov, I. (2008). Anti-Moisture Methodology for Electronics Enclosures in Harsh Storage Environments. Flomerics web-seminar, 19/06/2008, UK. More information
Belov, I. (2008). Humidity Management in Electronics Enclosure under Severe Climatic Conditions. SEES Seminar on Moisture and Corrosion, 24/04/2008, Stockholm. More information
Belov, I., Rydén, J., Lindblom, J., Zhang, Y., Hansson, T., Bergner, F., Leisner, P. (2008). Application of CFD Modelling for Energy Efficient Humidity Mangement of an Electronics Enclosure in Storage under Severe Climatic Conditions. EuroSimE 2008.. More information
Belov, I., Chedid, M., Leisner, P. (2008). Investigation of Snap-on Feeding Arrangements for a Wearable UHF Textile Patch Antenna. Borås: Centrum för textilforskning (CTF), The Swedish School of Textiles, University College of Borås, Ambience 08 International Scientific Conference. More information
Karlsson, K., Carlsson, J., Belov, I., Nilsson, G., Kildal, P. (2007). Optimization of antenna diversity gain by combining full-wave and circuit simulations. Ambience 08 International Scientific Conference. More information
Karlsson, K., Carlsson, J., Belov, I., Kildal, P. (2007). Software for optimizing multi-port antennas based on precomputed embedded element patterns from commerical codes. Ambience 08 International Scientific Conference. More information
Belov, I., Lindgren, M., Leisner, P., Bergner, F., Bornoff, R. (2007). CFD aided reflow oven profiling for PCB preheating in a soldering process. Piscataway, NJ.: IEEE, Ambience 08 International Scientific Conference. More information
Johansson, J., Belov, I., Leisner, P. (2007). CFD Analysis of an Avionic Module for Evaluating Power Distribution as a Thermal Management Measure for a Double-sided PCB. Piscataway, N.J.: IEEE, Ambience 08 International Scientific Conference. More information
Belov, V., Paldyaev, N., Shamaev, A., Leisner, P., Johansson, A., Belov, I. (2007). Mathematical Modeling of Conducted EMI in an Independent Power Supply System Including Power Line Communication Technology. Piscataway, N.J.: IEEE, Ambience 08 International Scientific Conference. More information
Belov, V., Paldyaev, N., Johansson, A., Leisner, P., Belov, I. (2005). Mathematical model of a multi-phase active power filter based on multi-phase bridge elements. Ambience 08 International Scientific Conference. More information
Johansson, J., Belov, I., Leisner, P. (2005). An experimental setup for validating a CFD model of a double-sided PCB in a sealed enclosure at various power configurations. Piscataway, NJ: IEEE Order Department, Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2005. More information
Johansson, J., Belov, I., Leisner, P. (2005). Investigating the effect of power distribution on cooling a double-sided PCB: Numerical simulation and experiment. ASME Summer Heat Transfer Conference 2005. More information
Belov, V., Paldyaev, N., Shamaev, A., Johansson, A., Leisner, P., Belov, I. (2005). Matlab/Simulink Model of an Active Power Filter Based on Multi-stage Inverter Architecture. ASME Summer Heat Transfer Conference 2005. More information
Belov, I., Wingbrant, H., Spetz, A., Sundgren, H., Thuner, B., Svenningstorp, H., Leisner, P. (2004). Thermal and flow analysis of SiC-based gas sensors for automotive applications. EuroSimE 2004. More information
Lindgren, M., Belov, I., Törnvall, M., Leisner, P. (2004). Application of simulation-based decision making in product development of an RF module. EuroSimE 2004. More information
Belov, V., Belov, I., Nemoykin, V., Johansson, A., Leisner, P. (2004). Computer modelling and analysis of EMC in a multi-phase electrical system. Göteborg: Department of Electromagnetics, Chalmers University of Technology, EuroSimE 2004. More information
Johansson, J., Belov, I., Säfsten, K., Leisner, P. (2004). Thermal Analysis of an Electronic Module with a Double-sided PCB Housed in a 2-MCU Enclosure for Avionic Applications. Washington, D.C.: IMAPS--International Microelectronics and Packaging Society, 2004 International Symposium on Microelectronics, November 14-18, 2004, Long Beach Convention Center, Long Beach, Ca. More information
Belov, V., Leisner, P., Johansson, A., Magnhagen, B., Belov, I. (2004). A Simulation-based Spectral Strategy for Power Filter Design in an Electrical System. London: IEEE, 2004 International Symposium on Microelectronics, November 14-18, 2004, Long Beach Convention Center, Long Beach, Ca. More information
Johansson, J., Belov, I., Säfsten, K., Leisner, P. (2004). Thermal design evaluation of an electronic module for helicopter applications. WEAG-CEPA2 Microelectronics Workshop on Thermal Management. More information
Belov, I., Leisner, P., Johansson, A., Magnhagen, B., Belov, V. (2004). A methodology of using simulation tools in teaching of robust electronics for electronics engineers. WEAG-CEPA2 Microelectronics Workshop on Thermal Management. More information
Leisner, P., Belov, I., Møller, P. (2003). Additive-free pulse reversal plating of cupper on printed circuit boards. WEAG-CEPA2 Microelectronics Workshop on Thermal Management. More information
Belov, I., Carlsson, J. (2002). Investigation of the coupling to a wire inside a box with apertures by means of FDTD simulations. 2002 International Symposium on Antenna Technology and Applied Electromagnetics, Antem 2002; Canadian Space Agency St. Hubert; Canada; 31 July 2002 through 2 August 2002. More information
Belov, V., Tishkin, V., Belov, I. (1999). Автоматизация проектирования электромагнитной совместимости и безопасности элементов в электротехнических системах транспорта (in Russian): (Design computerization of electromagnetic compatibility and safety of elements in transport electrotechnical systems). World Electrotechnical Congress, Moscow, Russia. More information
Belov, I., Tishkin, V. (1999). Программный комплекс для моделирования высокочастотных электромагнитных полей внутри помещений (in Russian): (Software package for modelling high-frequency electromagnetic fields inside rooms). World Electrotechnical Congress, Moscow, Russia. More information

Other publications

Belov, I. (2010). Optimization of PCB Heater Heating Profile for Power-efficient Humidity Management in Electronics Enclosures: OPTIMUS Worldwide User Meeting 2010, Antwerp, Belgium, November 22-23, 2010. More information
Sundaram, D., Belov, I., Matsushita, T., Diószegi, A. . Computational model of heat and gas transport in a furan resin sand casting core. More information